Table of Contents
Advertisement
Chapter 5 Useful tips for Mug Heat
Machine Maintenance
Erros Message displays on
LCD
COVER OPEN
OVER HEAT
ADC FAILS
TC0 FAILS
TC1 FAILS
TCx FAILS
NO MUG
TIME UP
If you are still unable to make the machine function properly, please contact
local distributor or regional HiTi offices,
Region
Taiwan
Mainland China
USA
Europe
Others
Action Taken
Flip down the plastic cover and press OK
Press OK and turn off the power first and then turn it
back on
1. Turn off the power first and then turn it back on
2. Check if the connection is loose between heating pad
and wire
3. Replace the heating pad if above steps fail to solve
the problem.
Turn off the power first and then turn it back on
Turn off the power first and then turn it back on
Turn off the power first and then turn it back on
Place the mug in the proper position and press OK
Press OK and turn off the power first and then turn it
back on
E-mail
csd@hi-ti.com
csd@hi-ti.com
service@hitouchimaging.com
sales@hi-ti.nl
csd@hi-ti.com
Tel
886-2-8258-3060
86-512-6760-1688
1-323-728-9900
31073-6450897
886-2-8258-3060
Advertisement
Table of Contents
