Hi-Touch Imaging Technologies Mug Heat Press Kit User Manual page 21

Mug heat press kit
Table of Contents

Advertisement

5. Make sure the wire and the new heater plate is properly reconnected.
6. Put the connector through the semi-sphere hole and put the heater plate
into the original location. Then put the black rubber and white Teflon onto
the machine.
Make sure the heater plate , black rubber and white silicon are wrapped
by white Teflon. Then push the white Teflon into the original location.
7. Completion of heater plate replacement
110V and 120V : Blue line
220V and 220V : White line

Advertisement

Table of Contents
loading

This manual is also suitable for:

116n

Table of Contents