Table of Contents
Advertisement
18. Wait until the temperature of mug cools down, then remove the mug
locating tape.
Useful Tips:
(1). Peel the photo off immediately while heating completed, can get ultimate output.
(2). Avoid burning from touching, please wear glove.
(3). Avoid double-image, don't stick the photo on the mug again.
(4). A photo only can transfer one Mug
19. The whole heating process is completed. You can stop or start from the
beginning and repeat the whole procedure to create a new personalized
mug.
Note:
Smokes may come out from the Mug Heat Press during the heating
process. The phenomenon is normal due to the water is been evaporating
during the heating process.
Advertisement
Table of Contents
