Clock Functions - IKEA SMAKSAK Manual

ENGLISH
function during cooking and press
confirm.
Setting the function: Direct Steam
This function increases humidity during
cooking.
Warning! Risk of burns and
damage to the appliance.
Released humidity can cause burns. Do not
open the oven door when the function
works. After the function stops, carefully
open the door.
1. Fill the cavity embossment with tap
water.
The maximum capacity of the cavity
embossment is 250 ml.
Fill the cavity embossment with water
only when the oven is cold.

Clock functions

Clock functions table
Clock function
To show or change the
time of day. You can
TIME OF DAY
change the time of day
only when the oven is off.
To set how long the oven
works. Use only when a
DURATION
heating function is set.
to
Application
Caution! Do not refill the
cavity embossment during
cooking or when the oven is
hot.
2. Put food in the oven and close the oven
door.
Refer to "Hints and tips" chapter.
3. Set the function: Direct Steam
4. Turn the control knob to set
temperature. Press
5. Turn the knob for the heating functions
to the off position to turn off the oven.
6. Remove water from the cavity
embossment.
Warning! Make sure that the
oven is cold before you
remove the remaining water
from the cavity embossment.
Heat-up indicator
When the oven function operates, the bars
in the display appear one by one when
the temperature in the oven increases, and
disappear when it decreases.
Clock function
To set when the oven
turns off. Use only when a
END
heating function is set.
Combination of DURA-
TION and END function.
TIME DELAY
51
.
to confirm.
Application