SOMFY Control Box 3S RTS Installation Instructions Manual page 16

EN
It is possible to store
If this procedure is carried out using a channel which has already been
memorised, this channel will be cleared.
The gate leaves must be in the intermediate position.
To install an Ixengo L 24V, consult the motor installation manual to
adjust the motor end limits before moving on to stage 2).
Auto-programming mode is accessible at any time including when the
auto-programming cycle has already been completed and the display
indicates "C1".
Warning
At the end of installation, it is essential to check that the obstacle
detection complies with appendix A of standard EN 12 453.
up to 40 control channels.
Only on Control Box 3S Axovia RTS models.
Copyright
CONTROL BOX 3S RTS
©
2017 SOMFY ACTIVITES SA. All rights reserved.