Kiddy K-Fix System; Fitting The Booster Car Seat To Your Child; Adjusting The Headrest Height - KIDDY Cruiser Fix Pro Instruction Manual

Booster car seat
Hide thumbs Also See for Cruiser Fix Pro:
Table of Contents

Advertisement

4.3 Kiddy k-fix system

The kiddy k-fix system provides additional security by using the lower
anchors of the vehicle LATCH (Lower Anchors and Tether for CHildren)
system. The booster car seat does not use the top tether attachment.
Kiddy recommends using the k-fix system if possible.
Lower anchors can be found in most vehicles 2003 model year and newer.
Lower anchors may be indicated on the vehicle seat by icons.
Consult your vehicle manual or contact your vehicle dealer or manufacturer
for additional information on locating and using lower anchors.

5. Fitting the booster car seat to your child

5.1 Adjusting the headrest height

WARNING
!
• Always adjust headrest to properly fit child's height after any other seat
adjustments have been made.
Fig. 12
The shoulder belt guide will be at or slightly above the child's shoulders. This
will provide the best side impact protection for your child.
DEATH or SERIOUS INJURY can occur
11
The booster car seat headrest can
be adjusted up or down to fit your
child according to his or her
seated height.
The
headrest
correctly when the child's ears are
at the narrowest area of the
headrest (Fig. 12).
ENG
is
positioned

Advertisement

Table of Contents
loading

Table of Contents