Advertisement
Installation Guide
Assembling the headboard bracket (optional)
IMPORTANT!
•
Failure to follow the installation steps as they appear in this guide could result in damage to your adjustable
bed.
•
For safety reasons, lifting of the adjustable bed must always be performed by two (2) people; and the unit
should always be on a flat surface.
•
Make
sure
to
3 inches (76.2 mm) between the headboard and the top of the mattress.
1
Using the remote control, raise the head section of the adjustable
bed to its full height.
2
Locate the first round panel under the head section of the bed.
The second round panel is for the bed leg.
3
Position the inner headboard bracket underneath the first round
panel. The bracket opening should be facedown under the bar.
4
Insert a retainer bolt fitted with a washer into the slot under the
inner headboard bracket and through the round panel. Tighten
the bolt using the Allen key wrench.
5
Place the open side of the outer headboard bracket onto the
exposed square tube of the inner headboard bracket to create
a tight fit.
6
Insert a retainer bolt fitted with a washer through the outer
headboard bracket and into the inner headboard bracket.
Tighten the bolt with an Allen key wrench. Leave loose enough
for adjusting.
7
Repeat steps 2 to 6 to install the brackets on the other side of the
head section of the adjustable bed.
8
When the headboard brackets are assembled, make sure there is
a space of 1.5 inches (38.1 mm) to 2 inches (50.8 mm) between the
edge of the adjustable bed and the headboard brackets.
9
Securely fasten the headboard bolts (not included with your parts
box) to the end of the headboard bracket assembly.
10
If you need to adjust the headboard brackets, unscrew the
bolts holding the outer headboard bracket and move them the
necessary distance. Reinstall the bolts and tighten securely.
Place your mattress on the adjustable bed surface.
Your adjustable bed and headboard installation is now complete.
position
the
bottom
of
the
headboard
cross
member
no
more
than
9
Hide quick links:
Advertisement
