Advertisement
Remote Control Guide
Anti-Snore (10)
Press this button to gently raise the head section and allow easier air intake which can help reduce snoring.
Massage
Start Massage (11)
Press the UP
button to activate the massage feature on the head and foot sections of the bed. Intensity starts at
level 3. Press the UP
NOTES:
• The massage intensity remains at its lowest level and does not turn off even when the intensity DOWN
is pressed repeatedly. To disable any active massage, press the Stop Massage button.
• This feature has an Auto Shutoff Timer that automatically turns off the massage after 15 minutes of continuous use.
Wave Mode (12)
Press this button to activate and select from different massage feels. The LED lights indicate the mode you have
selected. You can also press this button to turn the head and foot massages on. Wave mode intensity starts at level 4.
Stop Massage (5)
Press this button to disable any active massage.
Under Bed Light (13)
Press this button to turn the under bed lighting on, helping you safely navigate in and out of bed during the night. The
under bed light has seven (7) colors. Press this button multiple times to change colors. Press and hold to turn the under
bed light off.
Understanding the remote control features
•
The adjustable bed uses BLE (Bluetooth
•
The buttons are backlit when pressed to aid in the visibility of the remote control in low-light environments.
•
It is not necessary to face the receiver when operating the remote control. Remote signal is best transmitted within
9 feet (3 meters) of the bed.
NOTE:
The bed may show minor intermittent performance because of typical radio frequency interference. This is
normal in the operation of the bed, not a defect.
Customizing the preset buttons
You can store new head and foot positions by customizing the preset buttons: Incline, Lounge, and Zero Gravity. These
can be reprogrammed with your desired positions at any time. For safety reasons, the Anti-Snore and Flat buttons
cannot be customized.
1
Move the head and/or foot sections to your desired position.
2
Press and hold the
Program
at the same time for 2.5 seconds.
The new bed position is now stored in your selected preset button
overriding the factory default.
To restore the presets to their factory settings, see "Resetting your
system" on page 12.
or DOWN
button to gradually increase or decrease the intensity of the massage.
Low Energy) remote control system.
®
button and any of the preset buttons
button
11
Hide quick links:
Advertisement
