Advertisement
Installation Guide
Setting up the electronics
4
Install batteries in the remote control. Try all functions on the
Install batteries in the remote control. Try all functions on the
remote to make sure all features are operational.
remote to make sure all features are operational.
NOTE:
NOTE:
If the adjustable bed does not work, see the
If the adjustable bed does not work, see the
Troubleshooting section of this manual.
Troubleshooting section of this manual.
5
Return adjustable bed to flat position before continuing with the
Return adjustable bed to flat position before continuing with the
installation.
installation.
NOTE: Make sure your bed is in a flat position before using it.
NOTE:
Make sure your bed is in a flat position before using it.
Press the FLAT button on the remote control after plugging in the
Press the FLAT button on the remote control after plugging in the
power cord.
power cord.
Attaching the mattress retainer bar
1
Align the open ends of the retainer bar with the "loop" retainer
anchors located at the foot of the bed.
2
Slide the retainer bar into the anchors allowing the ends to glide
into the loop.
If the adjustable bed is set up without a headboard, place your
mattress on the adjustable bed surface. Your adjustable bed
installation is now complete.
If a headboard is to be installed, see "Assembling the
headboard bracket."
Installing the bed leg strap (optional)
To help prevent adjustable bed separation when using 2 Twin XL or
2 Split Cal King adjustable beds, use the bed leg strap.
1
Line up the two adjustable beds, then use the bed leg strap to
wrap the inside legs together tightly (front leg to front leg and
back leg to back leg).
2
Fasten the strap to prevent movement & maintain stability.
8
IMPORTANT!
Make sure power cords do
not obstruct any adjustable
bed mechanisms.
Hide quick links:
Advertisement
