Advertisement
【TF Card Slot】
This device provides 1 TF card slot. Using a screwdriver to
unscrew the screw behind the TF card slot with slight
strength and the card slot would pop up, then put TF card in
the slot in the right way. TF card could be used for device
upgrade. Before using it, please format the TF card into
FAT32 format.
Note:
In case of damaging TF card, user needs to power off
the device first to change the TF card.
【Set OLED Display】
Model I and model III of the device provide liquid crystal
display screens. Under normal working conditions, the liquid
crystal display is dark and shows the IP address of LAN1.
User can press the button to change the settings and query
accordingly:
Key
Name
Command
MENU
Menu/Exit
Enter Main Menu/Back
Page UP
Select the last target
︿
Page Down
Select the next target
﹀
SEL
Select/confirm
Select selected item
Display resolution is 128*16, support numbers, English case,
". ", "-", "_", "↑", "↓" and other characters, support single line
left and right scroll. Supports cursor blinking to determine
the current cursor position. Trigger the button, the screen
light is on. If there is no new operation for 30s, the screen
would go into sleep state.
Detailed operation steps of OLED display screen are as
follows:
Step 1
Start up, the first line shows the device name, the
second line shows the LAN1 IP address.
Step 2
Trigger the menu key to enter the menu interface,
options:
Server setting: basic information of the
-
device, please skip to step 3 and step 6 for
this setting;
Network
setting:
network
-
please skip to step 5 and step 6 for this
setting;
Save/Restart: Save Settings /Restart the
-
device, skip to step 6 for this setting.
Step 3
Select Server setting on the Menu interface,
trigger SEL key, enter the configuration interface
of Server setting, options:
Serial number (read only);
-
Server name (read only);
-
Firmware ver (read only);
-
Model name (read only);
-
Step 4
Select Network setting on the Menu interface,
trigger SEL key, enter the configuration interface
of Network setting, options:
LAN 1: network card 1 configuration;
-
LAN 2: network card 2 configuration.
-
Step 5
Select LAN 1(LAN 2) on the Network setting
interface, trigger SEL key, enter the configuration
interface of LAN 1(LAN 2), options:
Ethernet status: network card state (read
-
only);
MAC address: MAC address (read only);
-
IP config: IP configuration method (trigger
-
configuration,
SEL key configuration)
Options: Static, DHCP;
IP address (read-write);
-
Netmask (read-write);
-
Gateway: default gateway (read-write).
-
Note:
When the configuration needs to be modified, it can
be triggered by ∧ and ∨ keys to change the value.
Step 6
Select Save/Restart on the Menu interface,
trigger SEL key, enter the configuration interface
of Save/Restart, options:
Save: save configuration;
-
Restart: reboot the device.
-
Note:
Select Save or Restart, the interface shows the Disable
option (to prevent over-long key-press time and
misoperation) first, it can trigger ﹀ button, select the
Enable option, and then trigger the SEL button, Save
the configuration or Restart the device.
【Checking LED Indicator】
The series products provide LED indicators to monitor the
Advertisement
