KTM 690 DUKE EU Packaging 4 2008 Setup Instructions page 6

SET‑UP
–
Mount the footrests with the springs and bolts. Secure the bolts using the washers
and pins.
Plier for footrest spring (58429083000)
700216-01
–
Mount the reflector.
–
Recharge the battery. (
–
Stow away the tool set under the seat.
700217-01
–
Remove the protective plastic.
–
Carefully loosen and remove the tensioning belt over the link fork.
Info
An assistant prevents the motorcycle from falling over.
–
Carefully loosen and remove the tensioning belts around the lower triple clamp.
The vehicle is released at the front.
–
Together with an assistant, take the vehicle off of the palette.
700211-01
–
Fit the front spoiler. (
–
Fill up with fuel. (
–
Print out the current PDI form found on KTM DEALER.NET and perform the delivery
inspection.
–
Set kilometers or miles. (
S. 6)
S. 8)
S. 8)
S. 7)
4