Advertisement
After Installation (Standard / EU spec.)
Checking after installation.
Check the following points.
CAUTION
All bolts and screws, etc. are attached.
1
The shampoo unit and chair are securely attached.
2
If there is a slack in the shampoo unit or the chair, check if the bolts at the attaching
portions are fastened tightly.
Attaching the neck cushion.
Attach the neck cushion by following the
procedure below.
1
Place the neck cushion in the depression of the
bowl and fit it on the edge of the bowl. (Please
pay attention to the direction of back and forth.)
2
Attach the hooks of the neck cushion to the
fastener pins inside the bowl.
CAUTION
Do not lose the fastener pin.
3
Fit the neck cushion on the edge of the bowl
and attach the hooks of the neck cushion to
the fastener pin outside the bowl.
In order to prevent accidents during operation, be sure to check that
20
Seat side
Neck cushion
Fastener pin
Hook
Hook
Advertisement
