Advertisement
1
Installing Shampoo Unit (EU spec.)
1
Marking
Lay the accessory pattern paper on the floor as a template at the installation position referring to the raising
1
positions of cold/hot water supply pipes and tape the pattern paper.
Trace the positions of the shampoo unit base and the screw holes onto the floor.
2
Remove the pattern paper.
3
2
Installing the base bracket.
Fix the base bracket with accessory bolts on the floor at the marked position.
Notes in moving the shampoo unit
• When moving the shampoo unit, hold the shampoo unit at the rear side of the bowl and the mount base.
Do not hold the mixing pipe in the rear side of the bowl.
• Move the shampoo unit carefully and deliberately. The bowl is heavy and easy to break.
• Do not drag the shampoo unit. If dragged, the metal portion of the mount base and the frame may
damage the floor.
Rear of the bowl
Mount base
Bolts to be used:
Hex bolt x 4
(with spring washer)
9
Advertisement
