Takara Belmont KAZE AY-KFPLU AY-NRS1 Installation Manual page 11

2 Mounting Chair (EU spec.)
1
Attaching to the chair mount frame.
Place the chair on the chair mount frame with aligning the
1
centers of the mount pipes (4 pipes) in the back of the chair with
the lines on the side of the chair mount bracket of the chair
mount frame.
Fix the chair to the frame with the bolts from below. (4 points)
2
Bolts to be used (Accessory to the chair):
M8 x 70 Hex bolt
(with spring washer and plain washer)
(Use a wrench with across flat 12 mm.)
2 Attaching the footrest (U-footrest, W-footrest).
Align the holes on the ends of the footrest with the holes on the back of the seat. Fix the footrest to the chair
with the bolts from the back of the seat.
Footrest
Mount pipe
Bolts to be used (Accessory to the chair):
M8 x 30 Hex bolt x 4
(with spring washer)
(Use a wrench with across flat 12 mm.)
11
Chair mount bracket
Chair mount bracket
Mount pipe
Line
Chair mount frame