Table of Contents
Advertisement
1 Attach drain hose to installed drain pipe
!
Precaution
• Check that the drain hose is not bent or damaged.
This may affect water flow or damage the drain hose.
• Check that the drain hose clamp is firmly fastened.
If it is not fastened, water may leak or the drain hose
may come loose.
• Check that the hose is not in the shape of an S trap.
An S trap can adversely affect the flow of drainage water.
If the drain pipe layout causes an S trap to be formed,
check the installation position of the basin body and piping
dimensions, and make the necessary adjustments.
2 Attach the water supply pipe and hot water supply pipe
!
Precaution
• Always connect the pipe after removing all contaminants
on the pipe such as dirt, sand and oil.
• Check that the space around the pipe is completely filled
with caulking materials.
・ Check that pipe installation suits product specifications
(position, pipe, height) and that it matches the pipe
installation diagram and template
• Do not connect the hot water supply pipe and water supply
pipe in reverse.
• Check that water is not leaking from the joint.
Test water flow
* Test the water flow and inspect the following items. The hot water may be slightly tainted at the start of the water flow test, however this does not indicate any problem.
(1) Is there no water leaking from the pipe joints
The pipe joints may come loose during transportation, so check the joints within the basin thoroughly.
(2) Are the hot water supply and water supply pressures at the same, stable pressure
(3) Can temperature be controlled properly
Attach the maintenance cover to the basin
(1) Insert the maintenance cover into the main body.
(2) Attach the cover with the screws (4 pcs)
Attach piping
Checks after installation of pipes
Always test the water flow to prevent accidents during use.
Water stop
handle
!
Precaution
8
Close
Shower head
HOT WATER
DRAIN
SUPPLY
POSITION
COLD WATER
SUPPLY
POSITION
Close
Open
Advertisement
Table of Contents
