Pride Mobility JET 3 Owner's Manual page 23

V . C O M F O R T
CAUTION! Do not place the conrtoller cable so that it can be pinched in the seat frame or the
power base frame.
FOOTREST ANGLE
You can adjust the angle of the footrest with a 5 mm hex wrench. See figure 13.
To adjust the foot rest angle:
1. Turn the setscrew clockwise to lower the front of the footrest.
2. Turn the setscrew counterclockwise to raise the front of the footrest.
FOOTREST HEIGHT
The footrest height is easily adjusted to any one of six different heights. See figure 14.
To raise or lower the footrest:
1. Remove the bolt from the footrest using a 6 mm hex key and 13 mm socket.
2. Raise or lower the footrest to the desired height. See figure 14.
3. Reinstall the bolt into the footrest.
FOOTREST DEPTH
The Jet 3 uses a ball detent pin to fasten footrest to the power base. See figure 14.
To adjust the footrest depth:
1. Remove the ball detent pin from the footrest bracket.
2. Move the footrest in or out to the desired depth.
3. Reinstall the ball detent pin.
ANGLE ADJUSTMENT SETSCREW
Figure 13. Footrest Angle Adjustment
Jet 3/Rev I/Feb03
All manuals and user guides at all-guides.com
A D J U S T M E N T S
www.pridemobility.com
BALL
DETENT PIN
Figure 14. Footrest Depth and Height
Adjustment
HEIGHT ADJUSTMENT
HEIGHT
ADJUSTMENT
BOLT
23