Liquid Controls LectroCount LCR 600 Installation-Parts page 21

Introduction
DATA MANAGEMENT SYSTEMS
The DMS i1000 is an in-cab computer with a heavy duty lap pad interface. The DMS i1000 streamlines
the flow of data between the LCR 600 and back office accounting software. The DMS i1000 must be hard
wired to the LectroCount LCR 600. See manuals EM200-10 and EM200-11.
EZCOMMAND
EZCommand is Windows®-based interface that saves and distributes LectroCount LCR 600 settings and
updates. EZCommand can be loaded onto a laptop. Using a lap pad adapter (PN 81514) and a printer
extension cable (PN 71815), the lap top can be quickly connected to upload settings and updates in the
field. A flash cable (PN 81885), a data cable with a terminal block (J3) on one side and a 9-pin connector
for your PC, can also make the connection but requires opening the LCR 600.
21