Nortel DMS-100 Series Installation, Operation And Maintenance Manual page 35

Procedure 5-2
How to perform the Station Ringer Test (continued)
Step Action or key/switch operated
Feature key 5
22
23 Feature key 6
24 Feature key 7
Feature key 8
25
Feature key 9
26
Feature key 10
27
Feature key 11
28
29 Feature key 12
Feature key 13
30
RELEASE key
31
HOLD key
32
Vol UP
33
Vol DOWN
34
35 Handset OFF-HOOK
Handset ON-HOOK
36
37 HOLD key
HOLD key
38
Vol UP
39
Response
LCD 5 ON
LCD 6 ON
LCD 7 ON
LCD 8 ON
LCD 9 ON
LCD 10 ON
LCD 11 ON
LCD 12 ON
LCD 13 ON
LCD 2 & 8 ON
Dial tone, LCDs 1 –5
ON
Volume up
Volume down
Dial tone switches to
Handsfree speaker. All
LCDs WINK with the
exception of the
Handsfree indicator
which is ON.
Dial tone switches to
Handsfree speaker. All
LCDs WINK.
1 second buzz (500
Hz). LCDs 6–14 ON.
Ringing. All LCDs OFF.
Volume up
—continued—
297–2011–214 02.01 Standard February 1999
Verification procedures 5-5
Messages
Soft Reset, LCD ON
Soft Reset, LCD ON
Soft Reset, LCD ON
Soft Reset, LCD ON
Soft Reset, LCD ON
Soft Reset, LCD ON
Soft Reset, LCD ON
Soft Reset, LCD ON
Soft Reset, LCD ON
Soft Reset, LCD ON
Soft Reset. Turn on
TIP/Ring to Speaker.
LCD ON
None (Test Voice
Volume control)
None (Test Voice
Volume control)
Turn on TIP/Ring to
Speaker. Turn off
Handset. LCD WINK.
Turn on TIP/Ring to
Speaker. Turn off
Handset. LCD WINK.
Turn On/Off Alert B,
LCD ON.
None (Ring tone from
CO).
None (Test Ring
Volume control.