Figure 4-1 M5316 Bottom View - Nortel DMS-100 Series Installation, Operation And Maintenance Manual

4-2 Installation
Procedure 4-1
How to install the M5316
Step
1
2
3
297–2011–214 02.01 Standard February 1999
Action
Place the telephone in the work area (close to line cord
connecting block/wall jack) upside down on soft, solid, and
level work surface to prevent damage to movable keys and
the telephone face.
Connect one end of the handset cord into the 4-conductor
Teladapt connection in the base of the handset. Connect the
other end of the handset cord into the handset jack in base of
the M5316 (labelled E in Figure 4-1) . The Teladapt
connectors have a latch-tab which ensures correct alignment
and prevents the cord from being pulled out inadvertently
during service. Make sure that this latch is firmly snapped
into place.
Figure 4-1
M5316 bottom view
A
Route the handset cord through the channel provided (D in
Figure 4-1).
—continued—
B
D
E C