Advertisement
Available languages
Available languages
Symbol
III
Power tool designation
The cordless jigsaws are used for sawing wood, plas-
tic, aluminum and other types of materials (see guide-
lines for the use of saw blades)� The sawing trajectory
may be both straight and curved; the option of angling
the casing allows making angular cuts�
Power tool components
1 On / off switch
2 Lock-off button
3 Ventilation slots
Meaning
Protection class�
A sign certifying that the
product complies with es-
sential requirements of the
EU directives and harmo-
nized EU standards�
Attention� Important�
Useful information�
Wear protective gloves�
Pendulum motion off�
Pendulum
motion,
stage�
Pendulum motion, second
stage�
Pendulum
motion,
stage�
Saw blade T-shank�
Do not dispose of the power
tool in a domestic waste
container�
4 Battery lock *
5 Indicators of the state of battery charge *
6 Control button of the state of battery charge *
7 Battery *
8 Protective cover
9 LED lamp
10 Contact protector
11 Saw holder
12 Guide roller
13 Lever for pendulum stroke adjustment
14 Base plate
15 Plastic overlay *
16 Thumbwheel for stroke rate selection
17 Allen key *
18 Saw blade *
19 Charger *
20 Label *
21 Indicator (red) *
22 Indicator (green) *
23 Base plate mounting bolt
24 Scale
* Optional extra
Not all of the accessories illustrated or described
are included as standard delivery.
Installation and regulation of power tool
elements
first
Before carrying out any works on the power tool
remove the battery 7.
Mounting / dismounting / setting-up of
some elements is the same for all power
tool models, in this case specific models
are not indicated in the illustration.
The inserting / replacing of the saw blade (see fig. 1)
third
As a result of the long use the saw
blade 18 may become quite hot and
the sharp cutting edges may injure the
user, therefore one must always use
protective gloves when inserting / replacing the
saw blade 18.
Attention: observe the following rules upon the in-
serting of the saw blade 18:
• the teeth of the saw blade 18 must face forward;
• the claws on the stem of the saw blade 18 should
rest upon the saw holder 11;
• the saw blade 18 must fit inside the cavity of the
guide roller 12�
• Move protective cover 8 as shown in fig. 1.1 (this will
unlock the clamping mechanism of the saw holder 11
and allows you to insert / replace the saw blade 18)�
• Insert / replace saw blade 18 (see fig. 1.2).
• Move protective cover 8 as shown in fig. 1.3
(this will lock the clamping mechanism of the saw
holder 11)�
Installation and removal of plastic overlay (see
fig. 2)
Fig� 2 shows plastic overlay 15 mounting / dismounting
operations�
English
24
Advertisement
