flowair T-box Zone User Manual page 64

Dampers setting
Cube
Dampers
Active operating mode
Airflow setting
The icon informs that the parameter has
been defined in the weekly programer.
It is possible to change the parameter
temporarily. The change will only be active
in a given weekly programer zone
manual setting of the recirculation damper
position
Manual
position of the recirculation damper is
changed automatically depending on air
Auto
temperatures
64
Dampers setting in relation to an
external potential free input
Cube
Damper
Active operating mode
Operation with an external potential-free input should be
activated - see point "EXTERNAL INPUT SETTING" p. 13.
Three values of airflow should be definied:
• normal operation status
• 1 - first level of control
• 2 - second level of control
www.flowair.com