flowair T-box Zone User Manual page 63

Airflow setting
Cube
Airflow
Active operating mode
Airflow setting
The icon informs that the parameter has
been defined in the weekly programer.
It is possible to change the parameter
temporarily. The change will only be active
in a given weekly programer zone
Thermostatic mode - Fans turn OFF after
Therm
reaching the set temperature. The option is
not available when the device is operating
in according to the supply air temperature
sensor as a leading sensor. The selection of
the leading/master sensor from: supply air,
exhaust air and wall temperature sensors is
made during first startup. It is also possible
to define built in sensor in T-box sensor he
leading sensor
63
Airflow setting in relation to an external
potential free input
Cube
Airflow
Active operating mode
Operation with an external potential-free input should be
activated - see point "EXTERNAL INPUT SETTING" p. 13.
Three values of airflow should be definied:
• normal operation status
• 1 - first level of control
• 2 - second level of control
www.flowair.com