flowair T-box Zone User Manual page 32

Dampers setting
KM
Dampers
Appearance of this icon informs that the airflow
setting has been defined in the weekly programer. It
is possible to change it ad hoc only. Change will only
be active in given weekly programer event.
When the dampers are closed (no ventilation), it is
possible to select the operating mode of the fan
after reaching desired temperature. Fan can operate
continuously or be turned off.
32
Dampers setting relative to
external potential-free input
KM
Dampers
Operation with an external potential-free input should be
activated – see point "EXTERNAL INPUT SETTING" p. 13.
Three values of airflow should be definied:
• normal operation status
• 1 - first level of control
• 2 - second level of control
www.flowair.com