flowair T-box Zone User Manual page 31

Airflow setting
Airflow
Airflow setting – 3-steps
Appearance of this icon informs that the airflow
setting has been defined in the weekly programer. It is
possible to change it ad hoc only. Change will only be
active in given weekly programer zone.
When the dampers are closed (no ventilation), it is
possible to select the operating mode of the fan
after reaching desired temperature. Fan can operate
continuously or be turned off.
31
1
Airflow setting relative to
external potential-free input
Airflow
Operation in relation to an external potential-free input
– see point "EXTERNAL INPUT SETTING" p. 13.
Three values of airflow should be definied:
• normal operation status
• 1 - first level of control
• 2 - second level of control
1
2
3
www.flowair.com