flowair T-box Zone User Manual page 16

Weekly programer – Adding the
OFF event
Weekly programer
New task
16:15
Robur
KM OXeN
KM
In given example units will be turned off at 16:15.
SYSTEM WILL BE TURNED OFF UNTIL THE NEXT EVENT,
ACCORDING TO WEEKLY PROGRAMER SETTINGS.
KM
Weekly programmer
100%
3
OFF
For KM it is possible to set the airflow and the degree
of damper opening with which the device will work in
a given zone.
When the dampers are closed (no ventilation), it
is possible to select the operating mode of the
fan after reaching desired temperature. Fan can
operate continuously or be turned off.
16
CUBE
OXeN
Weekly programer
100%
For OXeN it is possible to set the airflow with which the
device will work in a given zone.
ROBUR KM
Weekly programmer
100%
For the Robur group with mixing chamber it is possible
to set the degree of opening of the dampers with which
the device will work in a given zone.
www.flowair.com