Table of Contents
Advertisement
2.
Grease the 4 roller bearings and the 2 wheel
bearings.
3.
Wipe up any excess grease.
4.
Lubricate the 2 chains using chain lubricant.
5.
Install the chain guards as shown in
Tensioning the Chains
Wear on the drivelines can cause the chains to loosen.
Adjust the chain wheels to keep the chains taut.
1.
Park the machine on a level surface.
2.
Engage the parking brake, shut off the engine,
and remove the key from the traction unit.
3.
Secure the attachment from movement.
Figure 14
Figure 15
Figure
4.
Remove the chain guard.
g347146
1. Chain guard
2. Bolt (2)
5.
Loosen the nuts on the chain wheel and adjust
the wheel in the slot until the chain is taut.
g347145
13.
1. Chain wheel
6.
Tighten the nuts.
7.
Install the chain guards as shown in
14
Figure 16
3. Washer (2)
Figure 17
2. Nut (2)
Figure
g346258
g346259
16.
Advertisement
Table of Contents
