System Connections; Connection With Tv With S-Videojacks And General Stereo System - Kenwood DV-2070 Instruction Manual

S*?':;. -•?;;.'itvC-tfV.-A £.-.<f)
**l5WS?Pre*£
->•:1 ^*^r;£>**;/;&-&&£££
-Mrs/
System Connections
■ ~*> aifrfi^ri if '.*1 r^.lihl.
Make connection as shown below. When connecting the
related system components, refer also to the instruction
manuals of the related components.
A, Caution: Do not plug in the power lead until all connec¬
tions are completed.
■ - ^ - - ,- v "V
•
DV-2Q7Q (En/K
Malfunction of microprocessor
If operation is not possible or erroneous display appears even
though all connections have been made properly, reset_the
microprocessor referring to "In case of difficulty" -Ui;
Connection with TV with S-VIDEOjacks and general stereo system
Connection with VCR
The VIDEO OUTPUT jacks should be connected directly to the TV. Do
not connect them to the TV via a VCR Otherwise the played video
may be disturbed due to the copy protection function
Initial setup
Set initial setup [6. TV Aspect) according to the aspect ratio 14:3 or
16:9) of your TV. —y4£*
COMPONENT VIDEO OUTPUT
2 V Ce Cr
co)
mm
~—o o o ^ „
OS) oooooooo
To wall AC
=' outlet
S-V1DEC cord (oroviaed.
Audio cord:provided:
Monitor TV
{commercially available)
Connection with general stereo system
AUDtO OUTPUT VIDEO OUTPUT COMPONENT VIDEO OUTPUT
mm
Audio cord (provided)
o®
IS-VIDEO I S-VIDEO 2 Y I Co Cr
@)
(mm
To wall AC
outlet
Monitor TV
(commercially available)
Stereo system (commercially available)
* The connected components shown here are typical examples.
_P^ 1, Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.
(j^jotesj 2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging
connection cords without removal of the power cord can cause malfunctions or damage to the unit