System Connections - Kenwood CD Series Instruction Manual

System connections

Caution:
4
Do not plug in the pow er lead until all connections are
completed.
M ake connections as show n below .
When connecting the related system components, refer also
to the instruction manuals of the related components.
CD-206/ DPF-R6010 :
AC1 1 0 -2 2 0 V
To w all AC outlet
CD-204/ 203/
DPF-R4010/ R3010 :
To w all AC outlet
Connection to digital amplifier or M D (CD-206/DPF-R6010 only)
Connect the DIGITAL OUTPUT (OPTICAL or COAXIAL) jack to the digital input jack of the amplifier, DAT recorder, M D recorder,
etc., using an optical fiber cable or coaxial cable w hich are commercially available in audio stores.
÷ When using an optical fiber cable to connect this unit to a digital
amplifier, insert the plug straight into the jack until a snap sound is
heard.
÷ Be careful not to bend, coil, or bundle the optical fiber cable.
÷ Optical fiber cables available on the market may not alw ays be able to
be used w ith this player. If your cord cannot be used w ith this unit,
consult the store from w hich you purchased the cord or your nearest
dealer.
1. Connect all cords firmly. If connections are loose there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the pow er cord from the AC outlet. Plugging/unplugging connection
Notes Notes
cords w ithout removal of the pow er cord can cause malfunctions or damage to the unit.
Downloaded from: http://www.usersmanualguide.com/
5
SL 16/XS8 sw itch
LINE OUTPUT @
SYSTEM CONTROL
ƒ
VARI ABLE
L
SL16 XS 8
R
AC2 2 0 -2 4 0 V
75 Ω coaxial cable
w ith RCA PIN.
(Commercially-
available)
SYSTEM
CD
CONTROL
L
R
SYSTEM
LIN E OUTPUT
CON TROL
2 3 AC 2 2 0 -2 4 0 V
AC 1 1 0 -1 2 0 V
L
R
M alfunction of microcomputer
If operation is not possible or erroneous display appears even though
all connections have been made properly, reset themicrocomputer
referring to " In case of difficulty" .
DIGITAL OUTPUT
COAXIAL
OPTICAL
TEXT
DIGITAL
INPUT
COAXIAL
OPTICAL
System control cord
Audio cord
ƒ
SL1 6 XS 8
5
SL 16/XS8 sw itch
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)
Digital component (M D, DAT, etc.)
(COAXIAL)
DIGITAL INPUT
(OPTICAL)
Remove the protection cap w hen using the
DIGITAL OUTPUT (OPTICAL) jack
Commercially-available
optical fiber cable
Digital amplifier
(or ordinary amplifier, receiver, etc.)
Optical fiber cable
∞