Kenwood DV-2070 Instruction Manual page 2

DV-2070 (En/K;
Before applying power
-
. . . 3*r .
:* j&f. •
)&£_.• ,
,^.MF
A
Caution: Read this section carefully to ensure safe operation.
..m
■■
cr -sc.. m-. ;■< . sr
Units are designed for operation as follows.
U.S.A. and Canada AC 120 V only
Safety precautions
A
Caution: Read this section carefully to ensure safe operation.
— . *v»c$5A'
WARNING
: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
A
CAUTION
A
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SER¬
VICE PERSONNEL
A
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE
USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCTS ENCLOSURE THAT MAY
BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS
A
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERTTHE USER TO THE PRESENCE OF
IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE
APPLIANCE.
The marking of products using lasers
(Except for some areas)
LASER PRODUCT |
The marking is located on the rear panel and says that the component
uses laser beams that have been classified as Class 1. It means that
the unit is utilizing laser beams that are of a weaker class. There is no
danger of hazardous radiation outside the unit.