System Connections - Kenwood DVF-3300-B Instruction Manual

System Connections

Make connections as shown below.
When connecting the related system components, refer also to the instruction manuals of the related components.
CAUTION
Connect the components as shown in the diagram. Only
plug the AC power cord into an AC wall outlet once con-
nections are completed.
CAUTION
Install the equipment so that the power outlet is easily ac-
cessible and, in case of emergency, immediately unplug the
power cord from the power outlet.
The power in this equipment will not be completely cut off
from the AC wall outlet when the main switch is turned OFF.
Connecting to a TV with video (composite) or S-video input terminal
TV
Connecting to a TV with SCART input terminal (For Europe)
TV
Make sure the DVD player is connected directly to the TV and not to a VCR, otherwise the DVD image could be distorted by the
Note Note
copy protection system.
12 EN
Video cord
Audio cord
Rear panel example
(for U.S.A.)
L
R
VIDEO
AUDIO
INPUT
S VIDEO
*S-video (Commercially available)
(Except for Europe)
Rear panel example
( For Europe)
INPUT
SCART
SCART cable (Commercially available)
Malfunction of microcomputer
If operation is not possible or erroneous display appears even
though all connections have been made properly, reset the mi-
crocomputer referring to "In case of difficulty".
* Connect only either the video (com
posite) cord or the S-video cord.
& "TV Output Select (only for Europe)"
‹