Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Robe ANOLIS Side Eminere 2 Wireles DMX
Summary of Contents for Robe ANOLIS Side Eminere 2 Wireles DMX
- Page 1 Version 1.6...
-
Page 2: Table Of Contents
Eminere Side wireless DMX Table of contents 1. Safety instructions ..............................3 2. Fixture exterior view ..............................4 3. Installation .................................. 5 3.1 Mounting the fixture ............................5 3.2 Connection to mains ............................. 5 3.3 The Booster box ..............................8 3.4 The Booster box installation .......................... -
Page 3: Safety Instructions
Eminere Side wireless DMX FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE POWERING OR INSTALLING YOUR Eminere Side ! Save it for future reference. This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure safe operation, it is absolutely necessary for the user to follow the safety instructions and warnings written in this manual. -
Page 4: Fixture Exterior View
Eminere Side wireless DMX The fixture becomes hot during operation. Allow the fixture to cool approximately 30 minutes prior to servicing or maintenance. Operate the fixture only after having familiarized yourself with its functions. Do not permit operation by persons not qualified to operate the fixture. -
Page 5: Installation
Eminere Side wireless DMX 3. Installation 3.1 Mounting the fixture The Eminere Side can be arranged in any orientation on a flat, non-flammable surface by means of two mounting brackets (5), the LED module (2) can be tilted 120° to adjust desired beam position. Ensure that the structure to which you are attaching the unit is secure. - Page 6 5 seconds period has not been kept and you have to repeat the Off/On procedure to unlink the fixture from the DMX transmitter . DMX addressing of connected Emineres Side has to be done manually by means of the Robe Universal Interface WTX and the software RDM Manager.
- Page 7 Eminere Side wireless DMX The tables below state max. theoretical number of Emineres connected in series without Booster boxes. EMINERE SIDE 2 wireless DMX Voltage Cable length * 120V 190V 230V 277V 10 m 20 m 30 m 50 m 70 m 100 m EMINERE SIDE 3 wireless DMX...
-
Page 8: The Booster Box
Eminere Side wireless DMX 3.3 The Booster box To compensate a voltage drop in a large installation, the Booster boxes have to be connected in the chain of Emineres Side. The following tables give numbers of Emineres Side after which the Booster box has to be installed in the chain of Emineres Side. -
Page 9: The Booster Box Installation
Eminere Side wireless DMX Example: E-box Daisy, Power supply= 120V, Cable length=70m, fixture=Eminere Side 2 wireless DMX The Booster box has to be connected after every 12th Eminere 2 wireless DMX (fixture 12 and fixture 24) from 32 fixtures. 3.4 The Booster box installation ALWAYS DISCONNECT THE EMINERES SIDE FROM MAINS BEFORE CONNECTING/DISCONNECTING THE BOOSTER BOX. - Page 10 Eminere Side wireless DMX 3. Screw the cover (2) back on the Booster box.
- Page 11 Eminere Side wireless DMX 3.5 Jumper cable assembling 1. Dismantle the connector and slide its parts onto the cable (6). Use the seal with inner diameter of 14.5 mm for the Anolis cable (P/N 13053138 or P/N 13053139). The seal with inner diameter of 14.5 mm serves for cable of diameter 10-14.5mm. The seal with inner diameter of 10 mm serves for cable of diameter 8-10mm.
- Page 12 Eminere Side wireless DMX US version 3. Put parts of the connector on the cable (5) and connect wires to the connector. First connect power wires (L,N, Earth) and after that data wires (D+, D-, 0V). Avoid excessive torsion of data wires! CE version Male Female...
- Page 13 Eminere Side wireless DMX 4. After connecting wires to the connector, tighten the three data wires (D+,D-, 0V) by means of the cable binder (6). 5. Screw the clamp ring (2) to the connector (1), insert the seal (3) to the clamp ring (2) and tighten the sealing nut (4) enough.
-
Page 14: Technical Specifications
Eminere Side wireless DMX 4. Technical specifications Power supply • Electronic auto-ranging • Input voltage: 120 - 277V AC, 50-60 Hz • Power consumption: Eminere Side 2: 45W Eminere Side 3: 65W Eminere Side 4: 85W • Inrush current: Eminere Side 2: <70A/250µs Eminere Side 3: <100A/200µs Eminere Side 4: <100A/200µs Optic... - Page 15 Eminere Side wireless DMX Housing • Aluminium extruded body with die-casted end caps • Tempered glass Cooling system • Convection Total heat dissipation • Eminere Side 2: 130 BTU/h (calculated) • Eminere Side 3: 177 BTU/h (calculated) • Eminere Side 4: 228 BTU/h (calculated Weight •Eminere Side 2: 4.75 kg (10.47 lbs) •Eminere Side 3: 7.0 kg (15.43 lbs)
- Page 16 Eminere Side wireless DMX • Eminere Side 3 • Eminere Side 4...
- Page 17 Eminere Side wireless DMX • Booster box Included items • 1 x Eminere Side • 1 x User manual Optional accessories Jumper Cables FF/FM: Jumper Cable FF/FM 0,25m (P/N 13053052) Jumper Cable FF/FM 0,5m (P/N 13053053) Jumper Cable FF/FM 1m (P/N 13053054) Jumper Cable FF/FM 2m (P/N 13053055) Jumper Cable FF/FM 3m (P/N 13053056) Jumper Cable FF/FM 5m (P/N 13053057)
-
Page 18: Cleaning And Maintenance
Jumper cable mounting added 06/01/2022 Jumper cable mounting changed Specifications are subject to change without notice. January 6, 2022 Copyright © 2019-2022 Robe Lighting - All rights reserved Made in CZECH REPUBLIC by ROBE LIGHTING s.r.o. Palackeho 416/20 CZ 75701 Valasske Mezirici...
Need help?
Do you have a question about the ANOLIS Side Eminere 2 Wireles DMX and is the answer not in the manual?
Questions and answers