1. Manuals
  2. Brands
  3. Texi Manuals
  4. Sewing Machine
  5. Tronic 3 NEO
  6. Operation manual

Texi Tronic 3 NEO Operation Manual

Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

QD3606 control box
operation manual
Tronic 3 NEO

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Tronic 3 NEO and is the answer not in the manual?

Questions and answers

Related Manuals for Texi Tronic 3 NEO

Summary of Contents for Texi Tronic 3 NEO

  • Page 1 QD3606 control box operation manual Tronic 3 NEO...
  • Page 2 Safety Instruction 1. Users are required to read the operation manual completely and carefully before installation or operation. 2. All the instruction marked with sign must be observed or executed; otherwise, bodily injuries might occur. 3. The product should be installed and pre-operated by well-trained persons. 4.

  • Page 3: Key Description

    1 Button Displays and Operating Instructions 1.1 Key Description Name Indicate Function If click, enter or exit the user parameter setting interface. Parameter Edit For the content of the selected parameters check and save: after select parameter Setting Parameter press this key to check and modify operation, after modified parameter value press Check and Save this key to exit and save the parameter.
  • Page 4 Items Range Default Description 0: half stitch 1: one stitch 2: continuous half stitch Mending stitch mode 3: continuous one stitch 4: Back-tacking when machine stop or pause The position of the pedal for 30-1000 accelerating The position of the pedal for the 30-1000 stop The position of the pedal for...
  • Page 5 Items Range Default Description up needle position Up position adjustment, the needle will advance stop when the Up needle position adjustment 0-2399 1950 value decreased, the needle will delay stop when the value increased. Down position adjustment, the needle will advance stop when Down needle position 0-2399 the value decreased, the needle will delay stop when the value...

  • Page 6: Error Code List

    3 Error Code List Error Code Problem Measure Turn off the system power and check whether the power supply voltage Over-voltage is correct. (Or whether it exceeds the specified rated voltage). Turn off the system power and check whether the power supply voltage Low-voltage is correct.

Table of Contents