Assembly - Steel City 30-200 Owner's Manual

CASTERS
1. Place the stand up side down on the floor and use the
cardboard to protect from scratching.
5. Place the movable caster in the center of the stand
square tube and align holes.
6. Put M8 hex screws and fix the hex nuts.

ASSEMBLY

2. Place a caster in the center of a braket and align both
braket caster hole.
3. Put M8 hex screw and fix the hex nut.
4. Repeat the procedures for the other caster.
7. Insert hex nuts to foot pad screws.
8. Fix the assembled foot pads to the stand. Don't tight
them.
9. Turn the stand side up and test if the stand is stable.
Adjust foot pads if necessary and tight the hex nuts.
Page 10