Assembly, Directional Valve Section And; Assembly, End Plate / End Valve - Bosch rexroth SB11 Assembly Instructions Manual

12/18 Load-sensing control block SB11 | Assembly description
Bosch Rexroth AG, RE 66177-10-R/2021-11-16
5�1�4 Assembly, directional valve section
▶ Orientate the control block segments
opposite O-ring side to the already mounted control block segment and slide on
one after the other via the tie rod screws
5�1�5 Assembly, end plate
1� Orientate the end plate
opposite O-ring side to the already mounted control block segment and slide
on via the tie rod screws
2� Screw the nuts onto the tie rods
locking washers.
and
with the flange surface of the
,
... to the stop.
/ end valve
/ end valve with the flange surface of the
... to the stop.
... without using any washers or