Table of Contents
Advertisement
5.4 Advanced Menu
Configuring the unit with the Auto Delete mode from 7 to 99 days prevents the unit from displaying or
archiving any data that is more than the selected number of days old. This feature may be required by
law in some jurisdictions, please consult with the local authorities.
Use the Jog to select from 7-99 Days or OFF.
Press the Enter button to implement the selection.
If the selection is altered from what was previously selected, the confirmation menu will appear.
Rotate the Shuttle to select Yes or NO.
ADM Setting
30
Days
5.5 Advanced Menu
Use thus menu to specify:
The data transfer rate for the RS-232 serial port.
The units Ethernet network connection settings (Ethernet units only).
The Modem connection settings.
Advanced Menu
o
Use the Jog to select the Baud Rate.
Press the Enter button to confirm the selection and exit the menu.
Press the Menu button to exit the menu without making changes.
Advanced Menu
o
An Ethernet session is an active network connection between a PC and the unit, with the user viewing
live camera images or accessing data stored on the hard disk. Only available on ethernet models.
When Ethernet is first selected,
this warning box will appear.
Select OK to continue.
Calibur DSR-1000eZ
Auto Delete Mode
ADM will change. Are you sure?
Communications
Communications
--OR—
Communications
Warning – Machine will reset if any values change!
5-4
Message
Yes
Baud Rate
Ethernet Settings
Message
[OK]
Baud Rate
Ethernet Settings
Modem Settings
1200 Baud
2400 Baud
4800 Baud
9600 Baud
19200 Baud
38400 Baud
57600 Baud
0150-0238A
Advertisement
Table of Contents
