Advantech DVP-7020A Manual page 46

Adv_DVPAPI_SetFrameRate
Syntax
int Adv_DVPAPI_SetFrameRate(int BoardID, int
PortID, double FrameRate)
Parameters
BoardID:
PortID:
FrameRate:
Return Value
SUCCEEDED:
FAILED:
BOARDIDERROR: Invalid board ID.
PORTIDERROR:
PARAMERROR:
SDKINITFAILED: SDK not initialized.
Description
This function sets frame rate of a specified capture
port.
This function should be called before
"Adv_DVPAPI_Start".
See Also
Adv_DVPAPI_GetFrameRate
Specifies
number(0~3).
Specifies
number(0~3).
A value to set frame rate.
(0.0<FrameRate<=30.0, Default
value is 30.0)
Function succeeded.
Function failed.
Invalid port ID.
Invalid parameter.
40
the board
the port
ID
ID