Restoring Factory Settings - Garmin GNS 400W Pilot's Manual & Reference

2 - NAV PAGES

Restoring Factory Settings

Press the small right knob momentarily to
7.
remove the cursor from the page.
8. If "WPT" is selected as the waypoint type, you
can designate any airport, NAVAID or user
waypoint as a reference waypoint. Press the
small right knob, turn the large right knob
to highlight the waypoint identifier field, then
use the small and large right knobs to enter
the identifier of the desired waypoint. Press
ENT to confirm the selected waypoint. Press
the small right knob to remove the cursor.
54
Restoring Factory Settings
A "Restore Defaults?" option allows you to reset
all data fields to their original factory default settings.
This will return the three user-selectable fields at the
top of the page AND the reference waypoint fields to
default settings.
To restore the factory default settings:
Press MENU to display the position page
1.
options menu.
Turn the large right knob to highlight
2.
"Restore Defaults?" and press ENT.
190-00356-00 Rev G