Setup 1 Page - Garmin GNS 400W Pilot's Manual & Reference

Setup 1 Page

The Setup 1 page provides access to airspace
alarms, CDI scale adjustment, an arrival alarm, units
of measure settings, position formats, map datums and
settings for local or UTC time display. When a setup
item is selected, the corresponding page will appear
providing access to the various unit settings.
To select, highlight
with cursor and press
ENT.
Third Page
in AUX group
190-00356-00 Rev G
To select a setup item from the setup 1 page:
1. Press the small right knob momentarily, to
activate the flashing cursor.
2. Turn the large right knob to select the desired
setup item, and press ENT.
The following setup items are available:
Airspace Alarms— allows you to turn the
controlled / special-use airspace message alerts on
or off. This will not affect the alerts listed on the
nearest airspace page or the airspace boundaries
depicted on the map page. It will simply turn on/off
the warning provided when you are approaching or
near an airspace.
An altitude buffer is also provided which "expands"
the vertical range above or below an airspace. For
example, if the buffer is set at 500 feet, and you are
9 - AUX PAGES
Utility Page
169