Trip Statistics - Garmin GNS 400W Pilot's Manual & Reference

9 - AUX PAGES
Utility Page
To record or reset the departure time:
1. Select "Flight Timers" from the utility page.
Turn the large right knob to highlight the
2.
reset mode field, under "Departure Time".
(The reset mode field will indicate "Pwr-on"
or "GS>30kt".)
Turn the small right knob to select the desired
3.
reset mode. ("Pwr-on" will record a departure
time when the 400W-series unit is turned on.
"GS>30kt" will record a departure time once
the GPS-computed ground speed exceeds 30
knots.)
In the case of a helicopter installation, the
Departure Criteria is "Pwr-on" or "In-air."
4. Press ENT when finished.
5. To reset the departure time, turn the large
right knob to highlight "Reset?" and press
ENT.
To view, use or reset total trip time:
1. Select "Flight Timers" from the utility page.
2. Turn the large right knob to highlight the
reset mode field, under "Total Trip Time".
166
(The reset mode field will indicate "Pwr-on"
or "GS>30kt".)
Turn the small right knob to select the
3.
desired reset mode. ("Pwr-on" will record trip
time, in hours/minutes/seconds, any time the
400W-series unit is turned on. "GS>30kt" will
record trip time any time the GPS-computed
ground speed exceeds 30 knots.)
In the case of a helicopter installation, the Total
Trip Criteria is "Pwr-on" or "In-air."
Press ENT when finished.
4.
To reset the total trip time, turn the large right
5.
knob to highlight "Reset?" and press ENT.

Trip Statistics

To reset trip statistics readouts:
1. Select "Trip Statistics" from the utility page.
2. Press MENU to display an options window
with several reset options:
• Reset Trip?— Resets trip odometer and average
ground speed readouts
• Reset Max Speed?— Resets maximum speed
readout only
190-00356-00 Rev G