User Waypoint Page Options - Garmin GNS 400W Pilot's Manual & Reference

6 - WPT PAGES
Modifying User Waypoints
3. Turn the large right knob to highlight the
first reference waypoint (REF WPT) field, if
you wish to change the reference waypoint.
Otherwise, continue turning the large right
knob to highlight the radial (RAD) or distance
(DIS) field, as desired.
Use the small and large right knobs to
4.
change the identifier — if desired — of the
reference waypoint. The reference waypoint
can be an airport, VOR, NDB, intersection or
another user waypoint. Press ENT to accept
the selected identifier.
5. The cursor moves to the radial (RAD) field. Use
the small and large right knobs to change
the radial from the reference waypoint, if
desired. Press ENT to accept the selected
radial.
6. The cursor moves to the distance (DIS) field. Use
the small and large right knobs to change
the distance from the reference waypoint to
the new user waypoint, if desired. Press ENT
to accept the selected distance.
134
7. The cursor moves to the "Modify?" action field.
Press ENT to modify the waypoint.
8. Press the small right knob to remove the
flashing cursor.
NOTE: If you attempt to modify or delete a
waypoint which is currently a direct-to waypoint
or the current "from" or "to" waypoint in the
active flight plan, the 400W-series unit will alert
you with the "Can't change an active waypoint"
or "Waypoint is active and can't be deleted" mes-
sage. You must first cancel the direct-to or remove
the waypoint(s) from the active flight plan before
modifying or deleting the waypoint(s).

User Waypoint Page Options

The following user waypoint page options are avail-
able by pressing the MENU key:
View User Waypoint List? displays a list of all
user waypoints currently stored in memory.
To view a list of all user waypoints:
1. From the user waypoint page, press MENU to
display the user waypoint page options.
Turn the large right knob to highlight "View
2.
User Waypoint List?" and press ENT.
190-00356-00 Rev G