Table of Contents
Advertisement
2.4.3 mSATA installation
Step 1: unscrew the 2 screws on the HDD/SSD bracket in the back panel, and remove the HDD/SSD bracket
Step 2: unscrew the 6 screws on the bottom cover and remove the mounting bracket and bottom cover
Step 2: unscrew 12 screws on left and right sides and back panel
Step 3: remove the back panel cover, insert the mSATA module, and screw
Step 5: complete the installation of the panel cover and bottom cover with the reverse step
Picture 2.26: mSATA installation（1）
Picture 2.27: mSATA installation（2）
30
User's Manual
Advertisement
Table of Contents
