ABI Attachments RASCAL Series Owner's Manual page 56

Options (cont'd)
ASSEMBLING 3PT HITCH TO EXISTING RASCAL FRAME
(4) 1/2-13 x 4" Bolts
thru both 3PT Hitch
Plates.
Existing Rascal Frame
Bottom Plate mounts
under existing Rascal
Frame.
Existing holes in 3PT
Hitch for optional Electric
Actuator Control Box
(both sides).
Visit: www.abisupport.com
1/2" Washers and Nuts
1/2-13 x 4" Bolts thru 3PT Hitch brackets,
existing Rascal tube and short tube.
(4) 1/2" Washers and Nuts
Existing Rascal tube slides into
3PT Hitch brackets and small tube
slides into Rascal frame.
56
Short tube goes inside
existing Rascal tube.