ABI Attachments RASCAL Series Owner's Manual page 11

Fig 18.
Fig 19.
Fig 20.
Hold center portion of toplink and turn free
end of toplink until the same amount of
thread is showing on both ends of toplink.
Rotate handle on toplink counterclockwise
to expand the toplink to line end of toplink
with mat bracket bolt.
Fig 21.
Email: support@abiattachments.com
After removing
washer,
lockwasher and
nut from bolt,
slide bolt out
until end of bolt
keeps the mat
bracket from
falling.
No thread showing
on this end of the
toplink.
Thread showing
on this end of the
toplink.
Fig 21.
Fig 22.
Fig 23.
Fig 24.
Fig 25.
11
Tighten nut to
secure end of
toplink.
Crank front jack
clockwise to
lower wheels.
Crank rear jack
counterclockwise to
raise the finish rake.
Call Toll Free: 877-788-7253