MERLYN 6 Series Quick Start Manual
2 door quadrant
Hide thumbs
Also See for 6 Series:
- Installation manual (16 pages) ,
- Installation instructions manual (9 pages) ,
- Assembly instructions manual (9 pages)
Advertisement
Thank you for choosing Merlyn. Please familiarise yoursel
with the fitting instructions before commencing fitting.
1. Check that you have the tools required.
. Check
2
that the installation site is compatible
with size of door supplied
3. Check all the enclosure components.
. Check
4
that the installation kit is complete
Any parts missing or damaged must be reported to your supplier within 5 days of purchase.
Inspect shower enclosure before fitting . N o claims will be acceptable after product has been installed.
INSTALLATION GUIDE
2 DOOR QUADRANT
IMPORTANT
f
DO NOT
attempt to install the product unless you can
tick ALL
4 boxes as satisfactory.
The wall plugs supplied with the installation kit are for
use in solid walls. Hollow or ' s tud-partition' walls will
require
alternative fixings. Please consult a hardware
supplier for the correct type.
It may also be necessary to consult your tiling supplier
about the correct method for drilling your tiles.
USE SAFETY EYEWEAR WHEN DRILLING
VIVID
10
M036-00
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for MERLYN 6 Series
Summary of Contents for MERLYN 6 Series
- Page 1 INSTALLATION GUIDE VIVID 2 DOOR QUADRANT IMPORTANT Thank you for choosing Merlyn. Please familiarise yoursel DO NOT attempt to install the product unless you can with the fitting instructions before commencing fitting. tick ALL 4 boxes as satisfactory. The wall plugs supplied with the installation kit are for 1.
- Page 2 COMPONENTS AND BOX CONTENTS Description Part No. Description Part No. Bottom seal V2101L/R V3211 Cover cap for upright profile L/R Moving panel Cover cap for wall profile V2104 B head screw ST4×30 S6LL8060 V4111 Bottom roller × 4 Flat head screw ST4 12 Handle S6HDLE...
- Page 3 FIXING KIT COMPONENTS, TOOLS REQUIRED, SITE V2101L V2101R V2104 × × ×2 × S6HDLEP1 S6LL8059 S6LL8060 × S6HDLEP2 × × × S6HDLEP3 × S6HDLEP4 V2115 V2114 V6113 × S6HDLEP5 × × ×6 × S6HDLEP6 S6HDLE V6115 V4110 V4111 × × S6HDLEP7 ×...
- Page 4 FITTING WALL PROFILE PROCEDURE TRAY MUST BE 100% LEVEL IN ALL DIRECTIONS Ensure the shower tray is level in all directions and is properly sealed to the wall. The wall must be tiled down to the top edge of the tray. Do not angle out bottom tile. 100 ％...
- Page 5 FITTING RAILS Step 3. Loosen fixed glass panel clip. Do not remove the screw. V4111 V3211 U shape seal (flush with glass edge) V3211 U shape seal (flush with glass edge) Step 5. Fit the wall profiles to the assembled frame.
- Page 6 FITTING DOOR PANELS AND ROLLERS Step 7 Position the assembled frame onto the tray and into the wall profile. NOTE: In a situation where you are close to the minimum adjustment, fit only 1 wall profile to the wall and put the second wall profile into the frame, position the frame onto the tray and then fix the second wall profile to the wall.
- Page 7 FINISHING Step 10. Hang the moving panel to the top rail, then push the bottom rollers to bottom rail. Top rail Top roller S6HDLEP1 S6HDLEP3 S6HDLEP2 S6HDLEP4 S6HDLEP5 push down S6HDLEP6 S6HDLEP7 Inside Bottom Bottom roller rail Step 13. Ensure the top rail is level If the moving panels are not closing correctly, or there then go on to step 12 is any gap between the magnets,...
- Page 8 SEALING AND TROUBLE SHOOTING Step 16. Use a quality silicone sealant and applicator gun to seal the finished door. SEALING INSIDE Seal top to bottom on the INSIDE between the wall profile and the wall. Note: Do not apply sealant on the inside of the tray.
Need help?
Do you have a question about the 6 Series and is the answer not in the manual?
Questions and answers