Download Print this page

MERLYN 6 Series Quick Start Manual

Bifold door

Advertisement

Quick Links

Thank you for choosing Merlyn. Please familiarise yoursel
Thank you for choosing Merlyn. Please familiarise yoursel
with the fitting instructions before commencing fitting.
with the fitting instructions before commencing fitting.
1. Check that you have the tools required.
1. Check that you have the tools required.
. Check
. Check
2
2
that the installation site is compatible
that the installation site is compatible
with size of door supplied
with size of door supplied
3. Check all the enclosure components.
3. Check all the enclosure components.
. Check
. Check
4
4
that the installation kit is complete
that the installation kit is complete
Any parts missing or damaged must be reported to your supplier within 5 days of purchase.
Any parts missing or damaged must be reported to your supplier within 5 days of purchase.
Inspect shower enclosure before fitting . N o claims will be acceptable after product has been installed.
Inspect shower enclosure before fitting . N o claims will be acceptable after product has been installed.
INSTALLATION GUIDE
INSTALLATION GUIDE
BIFOLD DOOR
SLIDING DOOR
IMPORTANT
IMPORTANT
f
f
DO NOT
DO NOT
attempt to install the product unless you can
attempt to install the product unless you can
tick ALL
4 boxes as satisfactory.
The wall plugs supplied with the installation kit are for
The wall plugs supplied with the installation kit are for
use in solid walls. Hollow or ' s tud-partition' walls will
use in solid walls. Hollow or ' s tud-partition' walls will
require
require
alternative fixings. Please consult a hardware
alternative fixings. Please consult a hardware
supplier for the correct type.
supplier for the correct type.
It may also be necessary to consult your tiling supplier
It may also be necessary to consult your tiling supplier
about the correct method for drilling your tiles.
about the correct method for drilling your tiles.
USE SAFETY EYEWEAR WHEN DRILLING
USE SAFETY EYEWEAR WHEN DRILLING
VIVID
VIVID
10
10
M043-00

Advertisement

loading
Need help?

Need help?

Do you have a question about the 6 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for MERLYN 6 Series

  • Page 1 VIVID BIFOLD DOOR SLIDING DOOR IMPORTANT IMPORTANT Thank you for choosing Merlyn. Please familiarise yoursel Thank you for choosing Merlyn. Please familiarise yoursel DO NOT DO NOT attempt to install the product unless you can attempt to install the product unless you can with the fitting instructions before commencing fitting.
  • Page 2 COMPONENTS AND BOX CONTENTS Description Part No. QTY Part No. Description V2101L/R Top cover cap L/R Shower room V2104 Cover cap for wall profile Handle S6HDLE 6X30 wall plug V6113 Water bottom seal V6LC8441378 V6LP 8702 Screw cover cap V2115 Pivot water piece V6M612 Countersunk screw M6X12...
  • Page 3 FIXING KIT COMPONENTS, TOOLS REQUIRED, SITE V2101L V2101R V2104 × × ×2 × S6HDLEP1 V6LW 8683 V6LP 8686 V6LP 8702 × × × × S6HDLEP2 × S6HDLEP3 × S6HDLEP4 V6113 V2114 V2115 V6115 × ×6 S6HDLEP5 × × × × S6HDLEP6 S6HDLE V4111...
  • Page 4 MARKING WALL PROFILE POSITION PROCEDURE TRAY MUST BE 100% LEVEL IN ALL DIRECTIONS Ensure the shower tray is level in all directions and is properly sealed to the wall. The wall must be tiled down to the top edge of the tray. Do not angle out bottom tile. 100 %...
  • Page 5 FITTING ASSEMBLED FRAME INSIDE INSIDE BOTTOM BOTTOM Note: Deflection fin Note: Deflection fin V6M6x12 to outside to outside Step 3. Step 4. Fit the pivot water piece, ensure the Fit the bottom water seal, ensure the direction is as picture shows. direction is as picture shows.
  • Page 6 This may V6LW 8683 result in the clip breaking. A Apply a dab replacement part may be of silicone in required, contact Merlyn to this screw hole purchase. INSIDE Step 7. INSIDE...
  • Page 7 SEALING AND TROUBLE SHOOTING Step 11. Use a quality silicone sealant and applicator gun to seal the finished door. SEALING INSIDE Seal top to bottom on the INSIDE between the wall profile and the wall. Note: Do not apply sealant on the inside of the tray.