Loading Paper For Receiving Faxes; Receiving Automatically In Fax Mode - Samsung SF-555P User Manual

The current reception mode is displayed when the machine is in Standby
mode.

Loading Paper for Receiving Faxes

The instructions for loading paper in the paper input tray are the same
whether you are printing, faxing, or copying, except that faxes can only
be printed on letter-, A4-, or legal-sized paper. See "Loading Paper" on
page 1.15
After loading paper for receiving faxes, set the paper size to the size of
paper you normally load in the paper input tray. SF-555P product uses
this setting when printing reports and determining autoreduction for
incoming faxes. See
Note: As for SF-555P, the printing function does not use this

Receiving Automatically in FAX Mode

The SF-555P is preset to FAX mode at the factory. If you have changed
the fax mode, take the following steps to receive faxes automatically:
1. Press and hold down Rcv. Mode/Contrast on the front panel
2. When you receive a call, the machine answers the call on a specified
Stand-alone Fax
3.14
All manuals and user guides at all-guides.com
08-DEC 15:30 FAX
If you seldom use the fax line for voice conversations, set your
machine to receive a fax automatically by selecting FAX mode.
for instructions.
page 3.3
setting. If you are loading special-sized media only for your
current print job, do not change this setting. After you have
finished printing, reload the original paper.
repeatedly until the display shows 'FAX MODE'.
number of rings and receives a fax automatically. To change the
number of rings. See 'Setting User-Selectable System Options' on
page 3.2.
To adjust the ringer volume, see 'Setting Volume' on
Current reception mode
to set the paper size.
page 3.1.