Samsung SF-555P User Manual page 155

Problem
Half of the page is blank.
Your machine prints the
wrong data, or it prints
incorrect characters.
Printing is too slow.
Scanner is busy receiving
or printing data. When the
current job is completed,
tray again.
Troubleshooting
7.10
All manuals and user guides at all-guides.com
Possible Cause and Remedy
• The page layout is too complex. Simplify the page layout
and remove any unnecessary graphics from the document
if possible.
• The page orientation setting may be incorrect. Change the
page orientation in the Printer Properties dialogue box.
• The paper size and the software paper size settings do not
match. Insert the correct paper into the machine or change
the software paper size settings.
• Scaling may be set to less than 100%. Change the Scaling
setting in the Printer Properties dialogue box.
• The printer cable specifications may be incorrect. Use or
replace the cable with an IEEE-1284 rated cable.
• The printer cable might not be connected properly. Check
the printer cable connection.
• There may be a problem with the printer driver software.
Exit Windows and reboot the computer. Turn the printer off
and then back on again.
• The printer cable specifications may be incorrect. Use or
replace the cable with an IEEE-1284 rated cable.
• If using Windows 95/98/Me, the Spooling Setting may be
set incorrectly. From the Start menu, select Settings and
Printers. Click your printer icon with the right mouse
button, select Properties, click the Details tab, and then
click the Spool Settings button. Select the desired spool
setting from the available choices.
• If you are using Windows NT/2000/XP, the Scheduling
setting may be set incorrectly. From the Start menu,
select Settings and Printers. Click your printer icon with
the right mouse button, select Properties, click the
Scheduling tab. Then, select the desired scheduling
setting from the available choices.
There may be a copying or printing job in progress. When the
current job is completed, try the job again.