Lcd Error Messages - Samsung SF-555P User Manual

LCD Error Messages

Display
DOCUMENT JAM
DOOR OPEN
FUSER ERROR
JAM/NO
CARTRIDGE
LINE ERROR
LOAD DOCUMENT
LSU ERROR
MEMORY FULL
NO ANSWER
NO. NOT
ASSIGNED
All manuals and user guides at all-guides.com
Meaning
The loaded document has jammed
in the feeder.
The front cover is not securely
latched.
There occurs a problem in the
fuser unit.
Recording paper has jammed
inside the unit, or the toner
cartridge is not installed.
Your unit cannot connect with the
remote machine, or has lost
contact because of a problem on
the phone line.
You have attempted to set up a
sending operation with no
document loaded.
A problem has occurred in the
LSU (Laser Scanning Unit).
The memory is full.
The remote machine has not
answered after all the redial
attempts.
The one-touch or speed dial
location you tried to use has no
number assigned to it.
Solution
Clear the document jam.
Press down on the cover until
it clicks in place.
Unplug the power code and
plug it back in. If the problem
still persists, please call for
service.
Clear the jam, or install the
cartridge
Try again. If failure persists,
wait an hour or so for the line
to clear, then try again.
Or, turn the ECM mode on. See
'Setting User-Selectable System
Options' on page 3.2.
Load a document and try again.
Unplug the power cord and plug
it back in. If the problem still
persists, please call for service.
Either delete unnecessary
documents, or retransmit after
more memory becomes
available, or split the
transmission into more than
one operation.
Try again. Make sure the
remote machine is operational.
Dial the number manually with
the keypad, or assign a number.
Troubleshooting
7.5