02-Setup
2/5/99
10:31 AM
Page 11
Loading Paper
When no paper is loaded, the BUSY lamp flickers and the SCAN/FAX lamp
glows red. You can load approximately 100 sheets of paper in the automatic
paper feeder.
1. Pull the paper extension on the automatic paper feeder all the way up.
Paper extension
2. Fan the paper and load it into the automatic paper feeder. Move the
paper to the far right, and push it slightly down until the machine pulls
the first sheet inward.
3. Squeeze the left paper guide and move it to the right to match the width
of the paper.
If you fail to fan the paper or adjust the paper guide, it may cause multi-paper
feeding.
Set Up Your SmartJet
1.11