Lcd Error Messages - Samsung SF-3100 User Manual

Inkjet facsimile
Hide thumbs Also See for SF-3100:
Table of Contents

Advertisement

LCD Error Messages

Display
RETRY REDIAL?
DOCUMENT JAM
LOAD DOCUMENT!
NO ANSWER
NO. NOT ASSIGNED
POLLING ERROR
SEND ERROR
INK LOW
MEMORY FULL
MEMORY LOW
NO CARTRIDGE
CHECK PAPER
RECEIVE ERROR
MEMORY RECEIVED
When it toggles with:
INK LOW
CHECK PAPER
NO CARTRIDGE
LOW BATTERY (SF-3100T Only)
NO BATTERY (SF-3100T Only)
NO MESSAGE (SF-3100T Only)
NO NEW MESSAGE (SF-3100T Only)
MEMORY FULL[TAM]
(SF-3100T Only)
Meaning
The machine is waiting to automatically redial another fax
number that was busy or did not answer.
The document you are sending has jammed in the feeder.
Clear the document jam, see "Clearing Jams" on page 7-16.
You have tried to send a fax and there is no document loaded
into the machine.
The other machine has not answered after all your attempts
to redial. Or, the other operator does not press START.
There is no number assigned to the One-Touch button or
two-digit Speed number you choose.
The machine you want to poll is not ready to answer your
poll. The person you are polling should have loaded their fax
machine with a document and be in send poll state.
Your fax has not gone through successfully. Try again.
The Print Cartridge has run out of ink. Install a new Print
Cartridge.see "Ink Level View" on page 7-10.
When this message is displayed, you cannot make a copy or
print a report. But, stored data in memory can be printed by
replacing the cartridge with new one.
Memory has become full or low. Either delete unnecessary
documents stored in memory, or send when memory
becomes available, or split the new document into smaller
parts.
Print Cartridge is not installed or properly installed.
Printer is out of paper. Load paper and press Start/Enter. If
printing paper is jammed during printing. Clear the paper
jam, and press Start/Enter.
A fax has not been received successfully. Ask the sender to
try again.
Due to some reasons, the machine stored data in memory.
You neither can make a copy nor print a report before
printing the stored data memory.
Do one of the following as per each message:
Replace the print cartridge with new one.
Load the paper, and press Start/Enter.
There might be a jam, clear the jam as described "Paper
Jams During Printing" on page 7-16.
Install a print cartridge.
The backup battery is weak. Replace battery.
The backup battery is not installed or is completely
discharged. Install/replace battery.
There is no message to play or erase.
There are no new caller message.
The voice memory is full. No more caller's messages can be
recorded. (Total recording time is about 12 minutes.)
Care and Maintenance
7-13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sf-3100t

Table of Contents